Epson Stylus C110 Service Manual page 49

EPSON Stylus C110/C120/D120
Occurrence timing
Detailed phenomenon
CR position
When turning on the power, the Carriage
Unit collides to the Change Lever located
to the front side of the printer.
• Power on
• Anywhere
The Carriage Unit collides with the Upper
Paper Guide Unit when power is turned
on.
TROUBLESHOOTING
Downloaded from www.Manualslib.com
Table 3-3. Check point for fatal error according to each phenomenon
Defective unit/
part name
PF Motor
ASF Unit
Upper Paper Guide
Unit
manuals search engine
Check point
1. Check if the PF Motor Connector Cable is connected to
CN9 on the Main Board.
2. Check if the PF Motor Connector Cable is not damaged. 2. Replace the PF Motor with a new one.
3. Check if the PF Motor operates.
1. Check if the Compression Spring 2.36 does not come off
in the Change Lever.
Change Lever
Compression Spring 2.36
1. Check if the Paper Guide Upper Unit is correctly
assembled.
Upper Paper Guide Unit
Troubleshooting
Revision B
Remedy
1. Connect the PF Motor Connector Cable to CN9
on the Main Board.
3. Replace the PF Motor with a new one.
1. Replace the ASF Unit with a new one.
1. Reassemble the Upper Paper Guide Unit to the
Main Frame correctly.
49