Epson Stylus C110 Service Manual page 48

EPSON Stylus C110/C120/D120
Occurrence timing
Detailed phenomenon
CR position
When turning on the power, the CR
Motor does not operate at all.
• Power on
• Anywhere
When turning on the power, the PF Motor
does not operate at all.
TROUBLESHOOTING
Downloaded from www.Manualslib.com
Table 3-3. Check point for fatal error according to each phenomenon
Defective unit/
part name
CR Motor
PF Motor
manuals search engine
Check point
1. Check if the CR Motor Connector Cable is connected to
CN8 on the Main Board.
CN8
CR Motor
Connector Cable
2. Check if the CR Motor Connector Cable is not damaged. 2. Replace the CR Motor with a new one.
3. Check if the CR Motor operates.
1. Check if the PF Motor Connector Cable is connected to
CN9 on the Main Board.
CN9
PF Motor
Connector Cable
2. Check if the PF Motor Connector Cable is not damaged. 2. Replace the PF Motor with a new one.
3. Check if the PF Motor operates.
Troubleshooting
Revision B
Remedy
1. Connect the CR Motor Connector Cable to CN8
on the Main Board.
3. Replace the CR Motor with a new one.
1. Connect the PF Motor Connector Cable to CN9
on the Main Board.
3. Replace the PF Motor with a new one.
48