Ink System Unit - Epson Stylus C110 Service Manual

EPSON Stylus C110/C120/D120

4.5.16 Ink System Unit

Part/Unit that should be removed before removing Ink System Unit
Upper Housing/Lower Housing/Main Board Unit/Left Frame/Panel Unit/Front
Frame/Right Frame/CR Motor/CR Scale/Hopper/Main Frame Assy./ASF Unit
Removal Procedure
When disassembling/assembling the Ink System Unit, pay attention
C A U T I O N
to the following instructions.
Be cautious not to get injured with the sharp metal edges of the
Frame Support.
Figure 4-73. Sharp Edges of Frame Support
Do not touch or damage the Sealing Rubber or the Head
Cleaner.
Mark the connection location before removing the Ink Tube.
DISASSEMBLY/ASSEMBLY
Downloaded from www.Manualslib.com
Frame Support
Disassembling Printer Mechanism
manuals search engine
1. Detach the Waste Ink Tube together with the Tube Stopper from the Waste Ink
Cover.
2. Detach the Waste Ink Tube from the groove of the Base Frame.
Waste Ink Cover
Figure 4-74. Detaching Waste Ink Tube
3. Remove the screw that secures the Ink System Unit (x1).
4. Slide the Ink System Unit in the direction of the arrow while releasing its hook
with flathead precision screwdriver, and remove the Ink System Unit.
Figure 4-75. Removing Ink System Unit
Revision B
Tube Stopper
Groove
Waste Ink Tube
Ink System Unit
Hook
C.B.P. 3x6, F/Zn-3C (6±1kgfcm)
101