EPSON Stylus C110/C120/D120
When laying the Main Frame Assy, make sure to put it as shown in the
C A U T I O N
figure below. Do not lay it with the rollers of the Upper Paper Guide
facing downward, or the rollers or the nozzle surface may get damaged.
Figure 4-59. Precaution on Handling Main Frame Assy.
7.
Remove the screws (x6) that secure the Main Frame, and remove it while avoiding
the LD Roller Shaft so as not to hit the Upper Paper Guide.
4
5
2
Figure 4-60. Removing Main Frame Assy.
DISASSEMBLY/ASSEMBLY
Downloaded from
www.Manualslib.com
3
LD Roller Shaft
Main Frame Assy.
6
Holding Position
C.B.S. 3x6, F/Zn-3C (8±1kgfcm)
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
Disassembling Printer Mechanism
manuals search engine
When installing the Main Frame Assy, pay attention to the
following instructions.
1. Put the right part of the Upper Paper Guide indicated in
2. Align the hook (x1) of the Frame Support with the positioning
3. Align the hook (x1) of the ASF Unit with the positioning hole
4. Align the guide pins (x2) of the Base Frame with the
1
the figure below under the LD Roller Shaft.
hole (x1) of the Main Frame.
(x1) of the Main Frame.
positioning holes (x2) of the Main Frame.
Upper Paper Guide
LD Roller Shaft
2
4
Figure 4-61. Installing Main Frame Assy.
Revision B
1
3
4
96