Kyocera 3011i Operation Manual page 515

Troubleshooting > Troubleshooting
Error
Code
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
2102 Failed to send via FTP.
2103
Failed to send the e-mail.
Failed to send i-FAX.
2201 Failed to send the e-mail.
2202 Failed to send via FTP.
2203 Failed to send via SMB.
2231 Failed to send i-FAX.
2204 Failed to send the e-mail.
Failed to send i-FAX.
3101 Failed to send the e-mail.
Failed to send via FTP.
Message
Check the network and SMB settings.
•
•
•
•
•
Check the network and FTP settings.
•
•
•
•
•
Check the network and Command Center RX.
•
•
•
•
•
Check the network.
•
•
•
Check the following of the FTP server.
•
•
Check the network.
•
•
•
Check the network.
•
•
•
Check the e-mail size limit of the SMTP settings
on the Command Center RX.
Check the authentication methods of both the
sender and the recipient.
Check the network.
•
•
•
Corrective Actions
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
POP3 server name of the POP3 user
SMTP server name
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Is FTP available?
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
10-37
Reference
Page
—
—
page 2-64
—
—
—
—
page 2-64
—
—