Replacing Staples (3,000-Sheet Finisher) - Kyocera 3011i Operation Manual

Troubleshooting > Regular Maintenance
4
5

Replacing Staples (3,000-Sheet Finisher)

When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.
1
Install the Staple Cartridge Holder.
Close the cover.
Open the finisher front cover.
10-11