Kyocera 3011i Operation Manual page 420

Setup and Registration (System Menu) > System Menu
Item
Low Power Timer
Panel Reset Timer
Sleep Timer
Interrupt Clear Timer
Error Job Skip
Error Clear Timer
*2
Unusable Time
Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Low Power Mode (page 2-39)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering Sleep.
Value
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Set the period after which the machine reverts to Normal mode when it has been set
to Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multipurpose
tray" error occurred when the job was started is automatically skipped after a set period
of time elapses.
Value: Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
Set a time period during which the machine will not print received faxes.
FAX Operation Guide.
8-67
Description