Xerox 7220 User Manual page 105

100 / 100%: This option keeps your output image the same size as your original image.
•
• Auto Independent %: The device selects a separate reduction or enlargement percentage
automatically for the width and the length of the image to make it fit onto the selected
paper size. The image is not reduced or enlarged proportionally.
If Paper Supply is set to Auto Paper Select, the Paper Conflict screen appears. Select the
Note:
desired paper tray, then touch OK.
To center the image on the page, select the Auto Center check box.
•
4. Touch OK.
Selecting the Paper Tray
Select a paper tray loaded with the desired paper to make copies on letterhead, colored paper,
transparencies, or different paper sizes.
To select the tray to use for copies:
Press the Services Home button, then touch Copy.
1.
2. For Paper Supply, touch the desired tray.
If the desired tray is not listed, touch More.
3.
4. Touch the desired tray, then touch OK.
Selecting 2-Sided Copy Options
Use the document feeder or the document glass to copy one or both sides of a 2-sided original.
To select 2-sided copy options:
Press the Services Home button, then touch Copy.
1.
2. Under 2-Sided Copying, select one of the following:
− 1->1 Sided scans only one side of the originals and produces 1-sided copies.
1->2 Sided scans only one side of the originals and produces 2-sided copies. To rotate the
−
second sides, touch Rotate Side 2.
2->2 Sided scans both sides of the originals and produces 2-sided copies. To rotate the second
−
sides, touch Rotate Side 2.
2->1 Sided scans both sides of the originals and produces 1-sided copies.
−
3. Press the green Start button.
− The document feeder automatically copies both sides of the 2-sided original.
− A message appears on the control panel when it is time to place the next original on the
document glass.
® ®
Xerox WorkCentre 7220/7220i/7225/7225i Color Multifunction Printer
Copying
105
User Guide