Switching Off - Stihl ASA 85 Instruction Manual

Switching Off

Short Work Breaks
Set the pruning shears to the standby
mode:
before carrying them short
–
distances
before clearing away fallen
–
branches, scrub and cuttings
1
Pull the trigger (1) twice in quick
N
succession and hold it there until
you hear 3 beeps, then release the
trigger.
Cutting blade closes and remains
closed.
Put your cordless pruning shears in
N
the holster.
Longer Work Breaks
Switch off your pruning shears at the
controller:
before carrying them longer
–
distances
before taking a break
–
ASA 85
Pull the trigger (1) and hold it there
N
– the cutting blade remains closed.
Move switch on controller to OFF.
N
Put your cordless pruning shears in
N
the holster.
NOTICE
Do not move the switch on the controller
to OFF while the cutting blade is closing
or opening. Always wait until the blade is
in the fully closed or fully open position
because parts of the power tool might
otherwise be damaged.
Automatic shutdown
The pruning shears shut down
automatically if they are not operated for
more than 10 minutes while in the ON
position.
The following signals then sound for a
period of 20 seconds:
5x Short beep:
To restart the power tool:
Move switch on controller to OFF.
N
Then
Move switch on controller to ON.
N
1
Cleaning and Maintenance Work
Switch off your pruning shears at the
controller and disconnect the connecting
cord:
before carrying out inspections,
–
adjustments or cleaning work
before performing repairs and
–
maintenance work
Switch off your pruning shears at
N
the controller:
Unscrew the union nut (1).
N
Remove the plug (2).
N
English
followed by a one
second pause
2 1
17