Hardware Specifications; N6200 Series Physical Characteristics; N6200 Series Clearance Dimensions - IBM N6270 Hardware And Service Manual

Hardware specifications

The following tables list the characteristics and requirements for your hardware.
30.9-36.4 kg (68-80 lbs)
DANGER
The weight of this part or unit is between 30.9 and 36.4 kg (68 and 80 lb). It
takes three persons to safely lift this part or unit.
Note: Operating at the extremes of the environmental requirements might increase
the risk of device failure.
Table 1. N6200 series physical characteristics
Weight
Rack units
Height
Width
Depth
Table 2. N6200 series clearance dimensions
Airflow
v 2858-C10 and 2858-C15 (single enclosure with one
controller): 30.9 kg (68 lb)
v 2858-C20, 2858-C21, and and 2858-C25 (single
enclosure with two controllers): 36.4 kg (80 lb)
v 2858-C22 (single enclosure with two controllers):
33.7 kg (74.3 lb)
v 2858-E12 (single enclosure with one controller and
one IOXM): 33.7 kg (74.3 lb)
v 2858-E11, 2858-E15, and 2858-E16 (single enclosure
with one controller and one IOXM): 33.6 kg (74 lb)
v 2858-E21, 2858-E25, and 2858-E26 (two enclosures,
each with one controller and one IOXM): 67.2 kg
(148 lb)
v 2858-E22 (two enclosures, each with one controller
and one IOXM): 67.4 kg (148.6 lb)
v 3U for single enclosure models
v 6U for dual enclosure models
v 13 cm (5.12 in.) for single enclosure models
v 26 cm (10.24 in.) for dual enclosure models
44.7 cm (17.6 in.)
61 cm (24 in.) without bezel65.5 cm (25.8 in.) with
bezel
Front 25.4 cm (10 in.)
Rear 30.5 cm (12 in.)
Preparing for the installation
5