Installing The Boot Device And Transferring System Files To The Boot Device - IBM N6270 Hardware And Service Manual

Figure 28. Removing the boot device
3. Open the boot device cover and gently lift the boot device out of the housing.
4. Set the boot device aside.
Installing the boot device and transferring system files to the
boot device
You can transfer the system files and restore configuration information to your
system by using netboot to boot the system and performing a software update to
copy the system files to the replacement boot device.
Before you begin
For copying system files to the boot device, you must have the following:
v The blank replacement boot device you received from your provider.
v Access to an HTTP server.
v
62
IBM System Storage: N6200 Series Hardware and Service Guide
Boot device cover
1
Boot device
2
The same version of Data ONTAP on both nodes in active/active
configurations.
2
1