Table of Contents
Advertisement
Chapter 2. Specifications and requirements
See the appendix for additional specifications.
Appliance specifications
v 2 x Intel Xeon E5-2698v4 processors
v 16 x 16 GB PC4-17000 2133 MHz ECC Registered RAM modules
v Two 150 GB SSD OS drives
v Onboard IPMI
v 2 Onboard 1 Gbps network ports.
v 1 Onboard 1 Gbps dedicated IPMI network port.
v Four dual-rotor 80 mm internal fans
v 2 hot-swappable 1100 W PSUs in 1+1 configuration
More Networking Options
The appliance can support other networking cards to provide more Ethernet ports. These ports are shown
in the highlighted card slots on the rear of the appliance in the following figure.
Figure 1. Rear of appliance with card slot highlighted
Requirements
Cabling
Table 1. Cabling requirements for the appliance
Cable
Power cords
1000BASE-T Copper
Cables
© Copyright IBM Corp. 2018
Type and Usage
Use only the power cords that are supplied with the appliance. Do not use another type
of cord. Do not use extension cords. If extra power cords are needed, contact IBM
Support.
Use high-quality Category 5e or 5 (CAT5e, CAT5) copper cables.
3
Advertisement
Table of Contents
