4005 Product Selection - Simplex LifeAlarm 4005 Series User Manual

4005 Product Selection

Category Model
4005-9101*
Panel with
Cabinet
4005-9102
* 4005-9101C is the ULC English version; 4005-9101CF is the ULC French version; both 4005-9101C and 4005-9101CF models delete the
Dual Line DACT and include low battery cutout operation.
Category Model
Electronics Only 4005-9150
4005-9806
4005-9807
4005-9809** Single (1) Circuit City Module, chassis mounted, below CPU
Optional Modules
4005-9810**
4005-9813
** DACT module is standard equipment on 4005-9101 and 4005-9102. Operation allows for either a DACT module or one or two City
Connection modules. The DACT is programmed using a terminal or a laptop computer in terminal emulation mode. Connection and
programming details are provided with Installation Instructions 574-049.
4005-9803
Expansion
Modules
4005-9804
(capacity is 10
4005-9805
expansion slots, 3
4005-9808
expansion slots are
used in base panel)
4005-9824
2975-9209
Cabinets
2975-9210
4005-9857
Doors
4005-9858
Model
Batteries
2081-9272
select one model
2081-9274
number; two
required for
2081-9271
24 VDC system
power; see page 7
4009-9802
for currents
4002 Adapter Kits
4005-9850
(for mounting
4005-9851
4005-9150
electronics into a
4005-9852
Simplex Model 4002
4005-9854
cabinet)
4081-9004
4081-9002
4081-9008
4081-9001
4081-9007
4005 Accessory
Selection
4602-9101
Reference
4602-9102
4601 Series
(refer to page 7 for specifications details)
Description
4005 Fire Alarm Control Panel; includes 8 standard IDCs, 4 NAC/Relay
Beige cabinet
circuits, 4 A power supply/battery charger, cabinet and door, and internal Dual
Red cabinet
Line DACT with two RJ45 plug DACT Cables, 14 ft long (4.3 m)
Description
4005 Fire Alarm Control Panel, 8 high current IDCs, 4 NAC/Relay Circuits, 4 A power supply,
internal Dual Line DACT; requires 4002 Adapter Kit or separately ordered cabinet and door
Four Circuit Class A Adapter Module for IDC and/or NAC modules, standard or expansion;
mounts on top of plug-in IDC/NAC module; circuits convert either NAC or IDC, or combination
Additional Five Slot Power Distribution Module, required when plug-in
module count exceeds five, or for connection of Expansion Power Supply
Internal Dual Line DACT; aftermarket add-on; for connecting to RJ31X Telco
jacks, includes two DACT Cables with RJ45 Plug, 14 ft long (4.3 m)
Expansion Power Supply, 24 VDC, 5 A, regulated; chassis mounted beneath
left side modules; requires 4005-9807 Power Distribution Module and
provides power to 4005-9807 only
Standard Operation, 2 Circuit IDC with 2 NAC/Relay circuits
Standard Operation, 4 Circuit IDC Module
4 Circuit NAC/Relay Module
8 Circuit Programmable I/O Module
4 Circuit IDC Module, high current operation, Class B, for detectors with relay bases
Beige 4005 Cabinet
Red 4005 Cabinet
Beige Door
Red Door
Description
6.2 Ah Battery, 12 VDC
10 Ah Battery, 12 VDC
33 Ah Battery, 12 VDC; requires External Battery Cabinet 4009-9802
External Battery Cabinet, beige with solid door; includes battery harness; mounts close-nippled
to 4005 cabinet; for up to 33 Ah batteries; cabinet size:
25-3/4" W x 20-3/4" H x 4-1/8" D (654 mm x 527 mm x 105 mm)
Two Unit
4002 Cabinet size
Four Unit
Six Unit
Four Unit 4002 Cabinet size, includes 4005 chassis adapter plate with red retainer panel
6.8 kΩ, 1/2W, End-of-Line Resistor Harness for standard IDCs; (ref. 733-886)
3.3 kΩ, 1 W, End-of-Line Resistor Harness for high current IDCs; (ref. 733-893)
10 kΩ, 1/2 W, End-of-Line Resistor Harness for NACs; (ref. 733-894)
2.2 kΩ, 1/2 W, End-of-Line Resistor Harness for 8 Pt I/O input mode; (ref. 733-892)
1.2 kΩ, 1 W, End-of-Line Resistor Harness for N.O. tamper switch monitoring; (ref. 733-891)
Status Command Unit (SCU), 16 LED serial connection annunciator
Remote Command Unit (RCU), 8 LED serial connection annunciator with remote tone-alert and
control panel status LEDs, and switch control for Trouble and Alarm Silence, System Reset,
and Manual Evacuation (4602 Series Annunciators are available for multiple packaging
applications, for further information, refer to data sheets S4602-0001 and S4602-0004)
LED/Switch Annunciators, modular design allows selection of required LEDs and control
switches (refer to data sheet S4601-0002)
Order cabinets if required for pre-installation. 4005-9150
Electronics only model requires a cabinet and door or a 4002
Adapter Kit.
Model Description
2081-9288 12.7 Ah Battery, 12 VDC
2081-9275 18 Ah Battery, 12 VDC
Includes 4005 chassis adapter plate with beige retainer
panel
6
Qty, 1 Max.
Qty, 2 Max.**
Qty, 1 Max.**
Qty, 1 Max.
S4005-0001-9 3/2009