Mounting Dimensions Reference - Simplex LifeAlarm 4005 Series User Manual

Mounting Dimensions Reference

Conduit knockouts are provided on top and bottom
24"
(610 mm)
NOTE: A system ground must be provided for Earth Detection and transient protection devices. This connection
shall be made to an approved, dedicated Earth connection per NFPA 70, article 250, and NFPA 780.
Tyco is a registered trademark of Tyco International Services GmbH and is used under license. Simplex the Simplex logo, LifeAlarm, and WALKTEST are trademarks of Tyco
International Ltd. and its affiliates and are used under license. NFPA 70, NFPA 72, and National Fire Alarm Code are registered trademarks of the National Fire Protection
Association (NFPA).
© 2009 Tyco Safety Products Westminster. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
Reference, 24" stud centers
Box width = 22-1/2" (572 mm)
FIRE SYSTEM SYSTEM ALARM AC
ALARM SUPERVISORY TROUBLE SILENCED POWER
ALARM SUPV TROUBLE ALARM SYSTEM
ACK ACK SILENCE RESET
ACK
23-3/8" (594 mm)
Tyco Safety Products Westminster • Westminster, MA • 01441-0001 • USA
www.tycosafetyproducts-usa-wm.com
Knockouts are provided for
nailing. Two on each side and
one each on top and bottom.
Drywall markers indicate
1/2" (13 mm) depth, two
on each side
Box includes an 0.048 "
(1.2 mm) thick trim for semi-
flush mounting. Height and
width are same as door.
23"
(584 mm)
3-7/8"
1/2"
(98 mm)
(13 mm)
S4005-0001-9 3/2009