Connecting Your N7000 Series System To An Ascii Terminal Console - IBM N7800 Hardware And Service Manual

v For additional information about Fibre Channel cables, see the IBM N series
support website.

Connecting your N7000 series system to an ASCII terminal console

The ASCII terminal console enables you to monitor the boot process, helps you
configure your N7000 series system after it boots, and enables you to perform
system administration.
For information about ASCII terminal console wiring, DB-9 to RJ-45 console
adapter pin connections, and connecting your system to an ASCII terminal console,
see the IBM System Storage N series Introduction and Planning Guide. This guide, as
well as other N series documentation, is available on the IBM N series support
website, which is accessed and navigated as described in "Websites" on page xx.
15
Chapter 2. Connecting an N7000 series system