Mounting Of The Base/Wall Fitting - SCAN 66 series Assembly And Instruction Manual

Mounting of the base/wall fitting

Mount the base/the wall fitting before removing the stove from the
packaging.
Scan 66-1
Wall
Please note!
The stove must remain in the packaging during
the mounting of the wall fitting at
If the stove is to be connected with a
the stove must be lifted out of the packaging and
laid on e.g. a carpet, the front facing downwards.
Montage af væghængt
Scan 66
NAVN: EMNE:
See page 25.
MATERIALE:
M3 NR.: DIMENSION:
C:\Working Folder\Designs\Scan 66\90066068.idw
STI:
A S S E M B LY
top outlet.
rear outlet
,
TG.NR:
N/A
VÆGT: DATO: 13-08-2014
N/A
AREAL:
Scan A/S
DK-5492 Vissenbjerg©
The bag contains:
A
2 x
6 x
B
4 x
C
1 x
90066068
SR
SIGN:
Scan 66-1
Wall mounted room heater fired by solid fuel
Standard: EN 13240 DoP 90066601
Minimum distance to combustible materials
Side: 300 mm - Front: 850 mm
CO emission at 13% O2: 0,029% 367 mg/Nm³
Dust at 13% O2: 27 mg/Nm³
Flue gas temperature: 302°C
Nominal heat output: 5 kW
Efficiency: 78%
Fuel type: Wood
Operation type: Intermittent
The appliance can be operated in a shared flue.
Country Classification Certificate/Standard Approved by
EUR Intermittent EN 13240 Teknologisk Institut
Norway Klasse 2 ELAB-2081-NS Teknologisk Institut
Schweiz
Germany
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlene Brennstoffe.
1000 Scan A/S DK 5492 Vissenbjerg 08-2014
B
11
A
C