SCAN 66 series Assembly And Instruction Manual page 17

Scan 66 -5
S-Curve
Mount the S-shaped base on the stove before removing the packing.
Scan 66 mont. S curve
N: EMNE:
ERIALE:
NR.: DIM.:
C:\Working Folder\Designs\Scan 66\90066127.idw
N/A
DATO: 05-04-2016
VÆGT:
N/A
AREAL:
Scan A/S
DK-5492 Vissenbjerg©
A S S E M B LY
Loosen the four screws (ca. 4-5 mm) so that it is possible to hook the
base on the stove.
Place the delivered magnets on the markings on the front of the
base and mount the loose front. Please note that the base can be
mounted at the right or at the left of the stove.
Fasten the screws lightly so that it is possible to lift the stove with
base up.
Make sure that the S-base is horizontal – if necessary, use a spirit
level. Adjust the stove on the base, and then tighten the four screws.
90066127
TG.NR:
hms
SIGN:
17