Configuration Procedure - HP MSR4080 Configuration Manual

Figure 6 Network diagram
Host
Server
Management Dept
Data server
Mail server
Public servers

Configuration procedure

1. Configure trusting port priority:
# Set the port priority of GigabitEthernet 2/1/0 to 3.
<Router> system-view
[Router] interface gigabitethernet 2/1/0
[Router-GigabitEthernet2/1/0] qos priority 3
[Router-GigabitEthernet2/1/0] quit
# Set the port priority of GigabitEthernet 2/1/1 to 4.
[Router] interface gigabitethernet 2/1/1
[Router-GigabitEthernet2/1/1] qos priority 4
[Router-GigabitEthernet2/1/1] quit
# Set the port priority of GigabitEthernet 2/1/2 to 5.
[Router] interface gigabitethernet 2/1/2
[Router-GigabitEthernet2/1/2] qos priority 5
[Router-GigabitEthernet2/1/2] quit
2. Configure the 802.1p-to-local mapping table to map 802.1p priority values 3, 4, and 5 to local
precedence values 2, 6, and 4.
This guarantees the R&D department, management department, and marketing department
decreased priorities to access the public servers.
[Router] qos map-table dot1p-lp
[Router-maptbl-dot1p-lp] import 3 export 2
[Router-maptbl-dot1p-lp] import 4 export 6
Internet
R&D Dept
Router
Marketing Dept
33
Host
Server
Host
Server