Setting The Maximum Reserved Bandwidth As A Percentage Of Available Bandwidth; Displaying And Maintaining Cbq - HP MSR4080 Configuration Manual

Settin g the maximum reserved bandwidth as a percentage of
available bandwidth
T he maximum reserved bandwidth is set on a per-interface basis and decides the maximum bandwidth
a ssigna ble for the QoS queues on
bandwidth, considering
Use the default maximum r
sure the Layer 2 frame header plu
interface.
To configure the maximum reserved bandwidth on an in
Ste p
1. Enter system view.
2. Enter interface view.
3. Set the maximum reserved
b
andwidth as a percentage of
a vailable bandwidth.

Displaying and maintaining CBQ

E xecute display
Task
Displa y class configuration.
Display traffic behavior
configuration.
Display QoS policy
configuration.
Display information about QoS
policies applied to an interface or
PVC
(MSR1000/MSR2000/MSR300
0).
Display information about QoS
policies applied
PVC (MSR4000
Display information about CBQ
on an interface or PVC.
an interfac
the bandw idth for contr
eserved bandwidth setting in mo
s the data traffic is under
Command
system-view
•
•
qos reserved-b
percent
commands in any view.
Command
display traffic classifier { system-defined | user-defin
display traffic behavior { system-defined | user-defined } [ behavior-name ]
display qos policy { system-defined | user-defined } [ policy-name
[ classifier classifier-name ] ]
display qos policy interface
{ pvc-name | vpi/vci } ] ] [ inbound | outbound ]
display qos policy interface [ interface-type interface-number [ pvc
to an interface or
{ pvc-name | vpi/vci } ] ] [ slot slot-number ] [ inbound | outbound ]
).
display qos queue cbq interface [ interface-type interfac
{ pvc-name | vpi/vci } ] ]
e. It is typically set n
ol traffic and Layer 2
st situations. When tuning the setting, make
the maximum available bandwidth of the
terface:
Enter interface view:
interf ace interface-type
interface-number
Enter PVC view :
a. interface a tm
interface- number
b. pvc vpi/vci
andwidth pct
[ interface-type interface-number [ pvc
58
o greater t han 80% of available
frame headers.
Remarks
N/A
N/A
The default setting is 80.
ed } [ classifier-name ]
e-number [ pvc