HP MSR4080 Configuration Manual page 81

Acl and qos
Hide thumbs Also See for MSR4080:
Table of Contents

Advertisement

[RouterB-classifier-qppb] quit
[RouterB] traf
[RouterB-
[RouterB-behavio
[RouterB] qos policy qppb
[RouterB-qospolicy-qpp
[RouterB-qospolicy-qppb] qu
# Apply the QoS policy qppb to
[RouterB] inter
[RouterB-Gi
[RouterB-GigabitEthernet2/1
Verifying
the configuration
# Verify that the related route on Ro
[RouterB] display ip routing-table 1.1.1.0 24 verbose
Summary Count : 1
Destination: 1.1.1.0/24
Protocol: BGP
SubProtID: 0x2
Cost: 0
IpPre: 1
Tag: 0
OrigTblID: 0
TableID: 0x2
NibID: 0x15000000
AttrID: 0x0
Flags: 0x100
Label: NULL
BkLabel: NULL
Tunnel ID: Invalid
BkTunnel ID: Invalid
# Display the QoS policy configuration on GigabitEthernet 2/1/1 of Router B.
[RouterB] display qos policy interface gigabitethernet 2/1/1
Interface: GigabitEthernet2/1/1
Direction: Inbound
Policy: qppb
Classifier: default-class
Matched : 51 (Packets) 4022 (Bytes)
5-m
inute
For
ward
Dro
pped
Oper
ator
Rule
(s)
fic behavior qppb
behavior-qppb] car cir 512 green pass red discard
r-qppb] quit
b] classifier qppb behavior qppb
it
face gigabitethernet 2/1/1
gabitEthernet2/1/1] qos apply policy qppb inbound
/1] quit
uter B takes effect.
Process ID: 0
Preference: 255
QosLocalID: 3
x0
Neighbor: 168.1.1.1
60
OrigNextHop: 168.1.1.1
Re
alNextHop: 168.1.1.1
BkNextHop: N/A
Interface: GigabitEthernet2/1/1
BkInterface: N/A
statist
ics:
ed: 0/28
(pp
s/bps)
: 0/0 (
pps
/bps)
: AND
:
incoming traffic on interface GigabitEthernet 2/1/1.
Age: 00h00m
33s
State: Active Adv
OrigVrf: default-vrf
OrigAs: 1000
LastA
s: 1000
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents