HP MSR4080 Configuration Manual page 56

You cannot configure the queue ef command together with the any of the commands queue af and
•
queue-length for a traffic behavior.
The default class c
•
To configure que
•
following units:
Bandwidth.
Percentage of the available bandwidth.
To configure both the queue ef command and the queue af command in a policy, you must
•
configure them in the same unit (either band
percentage of the remaining bandwidth, you can configure EF in an absolute value or percentage.
T o conf igure EF and the maximum
Step
1. Enter system view.
2. Create a traffic behavi
enter traffic behavior vi
3. Configure EF and the
maxi mum bandwidth.
Configuring WFQ
Step
1. Enter system view.
2. Create a traffic be
enter traffic behav
3. Configure WFQ.
You can associate the traffic behavior that contains a WFQ action only with the default class.
Configurin g the maximum queue size
Step
1. Enter system view.
2. Create a traffic behavior and
enter traffic behavior view.
3. Set the maximum queue size.
Configure the queue af command or the queue wfq command before you configure the queue-length
command. The undo queue af or undo queue wfq command also cancels the queue-length command.
annot be associated with a traffic behavior including EF.
ue ef for multiple classes of a policy, you must configure them in one of the
bandwidth:
Command
system-view
or and
traffic behavior behavior-name
ew.
queue ef bandwidth
[ cbs burst ] | pct percentage
[ cbs-ratio ratio] }
Command
system-view
havior and
traffic behavior behavior-name
ior view.
queue wfq [ queue-number
total-queue-number ]
Command
system-view
traffic behavior behavior-name
queue-length queue-length
width or percentage). When you configure AF in
{ bandwidth
54
Remarks
N/A
By default, no behavior is created
By default, EF is not configured.
Remarks
N/A
By default, no behavior is created.
By default, WFQ is not config
Remarks
N/A
By default, no behavior is created.
By default, tail drop is used and
queue size is 64.
If the burst traffic is too heavy,
increase the queue length to make
queue scheduling more accurate.
.
ured.
the