Configuring traffic redirecting
Traffic redirecting redirects packe
The router supports redirecting traffic to an interface.
The following matrix shows the featu
Hardware
MSR1000
MSR2000
MSR3000
MSR4000
Configuration procedure
To configure traffic redirecting:
Step
1.
Enter system view.
2.
Create a traffic class and
enter traffic class view.
3.
Configure match criteria.
4.
Return to system view.
5.
Create a traffic behavi
and enter traffic behav
view.
6.
Configure a traffic
redirecting action.
7.
Return to system view.
8.
Create a QoS policy and
enter QoS policy view.
ts ma
tching the specified match criteria to a
re and hardware compatibility:
Command
system-view
traffic classifier classifier-name [ operator { and
| or } ]
if-match [ not ] match-criteria
quit
or
ior
traffic behavior behavior-name
redi
rect interface interface-type
interface-number
quit
qos policy policy-name
72
Traffic redirectin
g feature compatibility
No
No
Yes on HMIM-24GSW interface modules
Yes on HMIM-24GSW interface modules
location f
or processing.
Remarks
N/A
By default, no t
raffic class
exists.
By default, no match
criterion is configured for
a traffic class.
For more information
about the match criteria,
see the if-match
command in ACL and
QoS Command
Reference.
N/A
By default, no traffic
behavior exists.
By default, no traffic
redirecting action is
configured for a traffic
behavior.
N/A
By default, no QoS policy
exists.