Display Settings; Unit For Amount Of Water - Jura Z6 Instructions For Use Manual

Display settings

Unit for amount of water

T Turn the Rotary Switch to change the setting.
T Press the
'Save'
'Saved' appears briefly on the display.
'Water hardness'
T Press the
'  button the number of times needed to display
the start screen again.
In the program item
display brightness (as a percentage).
Precondition: 'Please select product'
T Press the Rotary Switch.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Display'
T Turn the Rotary Switch to change the setting.
T Press the 'Save'
'Saved' appears briefly on the display.
'Display'
T Press the '  button the number of times needed to display
the start screen again.
In the program item
unit used for the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from 'ml' to 'oz'.
Precondition: 'Please select product'
T Press the Rotary Switch.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Units'
4 Permanent settings in programming mode
button.
'Machine settings' / 'Display'
is displayed.
'Machine settings'
'Display'
button.
'Machine settings' / 'Units'
is displayed.
'Machine settings'
'Units'
you can set the
is displayed.
is displayed.
you can select the
is displayed.
is displayed.
31