4 Permanent settings in programming mode
Display settings
Background
36
In the programme item
make the following settings:
U
'Brightness'
(as percentages)
U
'Contrast'
(high, normal, low)
U
'Backlight'
(backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (4/5)'
T Press the
'Display'
'Display'
T Press the
'Brightness'
T Press the
'+'
or
T Press the
'Save'
'Saved'
appears briefly on the display.
'Display'
O T Press the P button to exit programming mode.
'Please select product:'
In this programme item you can set the background for the display
of your GIGA.
E The set background is only displayed on the start screen.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (4/5)'
T Press the
'Colour scheme'
'Colour scheme'
T Press the
'+'
or
T Press the
'Save'
'Saved'
appears briefly on the display.
'Machine settings (4/5)'
O T Press the P button to exit programming mode.
'Please select product:'
'Machine settings
(4/5)' /
is displayed.
is displayed.
button.
button.
'–'
button to change the setting.
button.
is displayed.
is displayed.
button.
'–'
button to change the setting.
button.
'Display'
you can
'Machine
'Machine