Table of Contents
Advertisement
Elektroapparate AG
Language
15
Machine settings 4/6:
15.1
Energy Save Mode (E.S.M.):
Save energy:
Thermoblock is always on temperature and ready
Save energy:
Thermoblock switches off after
When choosing a product, the thermoblock has to heat up first.
Display: SAVE ENERGY
ESM direct draw off: Draw off coffee right away out of the stand-by mode
15.2
Switch off time:
15 MIN, 0.5, 1.0, 2.0 ... 15 hours
15.3
Units:
ML/OZ
15.4
Factory settings, Reset:
15.4.1
ALL PRODUCTS:
The settings (amount of water, strength, temperature) for all products are reset to the default
settings
15.4.2
MACHINE:
All customer settings are reset to the default settings (but no water hardness level and filter).
The IMPRESSA then switches off.
When switching on, the machine asks for the language and initializes
15.4.3
PRODUCT:
The settings (amount of water, strength, temperature) for any product can be reset individually to
the default settings.
The corresponding double product is reset at the same time.
15.4.4
DISPLAY SETTINGS:
All display settings are reset to the factory settings
Author: Patrik Studer
Date:
Rev. A:
26.06.2012
15.11.2012
Technical information
IMPRESSA XJ9 One Touch TFT
EN
INACTIVE
ACTIVE
pprox.. 5 min when no product has been drawn off.
(Standby energy consumption
Checked:
Rev. B:
Rev. C:
23.11.2012
12.03.2013
(energy consumption
(INACTIV not possible)
Approved:
Docu.-name:
L:\Geräte\Linie_XJ\XJ9\Schulungsunterlagen\E\Technische_
Informationen_XJ9_EN.doc
Rev. D:
Rev. E:
02.04.2013
08.08.2013
Technical Support
Professional
pprox.. 10.6 Wh)
pprox.. 4.1 Wh)
Technische_Informationen_XJ9_EN.doc
Rev. F:
Page 12/17
Advertisement
Table of Contents
