Language; Display Settings - Jura GIGA W3 Professional Instructions For Use Manual

Language

Display settings

In this program item you can set the language used by your GIGA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the program item
settings (4/5)'
T Press the 'Choose language'
'Choose language'
E To display more languages, press the
right).
T Press the 'Deutsch'
'Gespeichert'
'Geräteeinstellungen (4/5)'
O T Press the P button to exit programming mode.
'Bitte wählen Sie Ihr Produkt:'
In the program item 'Machine settings
the following settings:
U
'Brightness' (as percentages)
U
'Contrast' (high, normal, low)
U
'Backlight' (backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the program item
settings (4/5)'
T Press the 'Display'
'Display'
T Press the 'Brightness'
T Press the '+' or
T Press the
'Save'
'Saved' appears briefly on the display.
'Display'
4 Permanent settings in programming mode
is displayed.
is displayed.
button.
button.
appears briefly on the display.
(4/5)' /
is displayed.
is displayed.
button.
button.
' –' button to change the setting.
button.
'English'
'Machine
'Next' button (bottom
'Display' you can make
'Machine
37