Display Settings; Unit For Amount Of Water - Jura J600 Instructions For Use Manual

4 Permanent settings in programming mode

Display settings

Unit for amount of water

28
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the programme item.
'Water hardness'
T Turn the Rotary Switch to change the setting.
T Press the
'Save'
'Saved' appears briefly on the display.
'Water hardness'
T Press the P button to exit programming mode.
In the programme item
display brightness (as a percentage).
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the programme item.
'Display'
T Turn the Rotary Switch to change the setting.
T Press the 'Save'
'Saved' appears briefly on the display.
'Display'
T Press the P button to exit programming mode.
In the programme item
the unit used for the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from 'ml' to 'oz'.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
'Machine settings'
'Water hardness'
button.
'Machine settings' / 'Display'
'Machine settings'
'Display'
button.
'Machine settings' /
'Machine settings'
'Units' is displayed.
is displayed.
is displayed.
you can set the
is displayed.
is displayed.
'Units' you can select
is displayed.