Unit For Amount Of Water; Display Settings - Jura Z8 Instructions For Use Manual

4 Permanent settings in programming mode

Unit for amount of water

Display settings

30
In the programme item
the unit used for the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from 'ml' to 'oz'.
Precondition: The start screen is displayed.
T Touch ' P '.
'Machine settings'
T Touch
'Machine
'Switch off after'
T Move your finger across the display until
in the centre.
T Touch 'Units'.
'Units'
T Now move your finger to the left or right to change the set-
ting to 'oz'.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Units'
T Touch 'Back' the number of times needed to display the start
screen again.
In the programme item
display brightness (as a percentage).
Precondition: The start screen is displayed.
T Touch ' P '.
'Machine settings'
T Touch 'Machine
'Switch off after'
T Move your finger across the display until
played in the centre.
T Touch 'Display'.
'Display'
T Now move your finger to the left or right to change the set-
ting.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Display'
'Machine settings' /
settings'.
'Machine settings' / 'Display'
settings'.
'Units' you can select
'Units' is displayed
you can set the
'Display' is dis-