Important information Proper use ..............................6 For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 Determining the water hardness .......................11 First-time use ..............................11 Connecting milk ............................
Page 3
CAUTION draws your attention to potential damage to the machine. Symbols used Prompt to take action. This symbol means that you are being prompted to perform some action. Information and tips to make it even easier to use your Z6. ‘Coffee’ Display...
Control elements Control elements Cover for powder chute for ground coffee Cover cap for grinder adjustment switch Powder chute for ground coffee Grinder adjustment switch On/Off button Q Water tank Mains cable (permanently connected Bean container with aroma preservation or plug-in) (back of the machine) cover Hot-water spout Height- and width-adjustable dual spout...
Page 5
Top of the machine Display Rotary Switch Multi-function buttons (button function depends on what is shown in the display) Back of the machine: Service socket with JURA Smart Connect Accessories Container for milk system Measuring spoon for ground Filler funnel for ground coffee...
JURA or by an authorised JURA service centre. Make sure that the Z6 and the mains cable are not located close to hot surfaces. Be careful to ensure that the mains cable is not...
Page 7
Protect the Z6 from environmental influences such as rain, frost and direct sunlight. Do not immerse the Z6, mains cable or con- nections in water. Do not put the Z6 or any individual parts in the dishwasher.
Page 8
Important information Before cleaning, switch the Z6 off with the On/ Off button Q. Always wipe the Z6 with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. Only connect the machine to the mains volt- age in accordance with the information on the rating plate.
Page 9
Important information Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.
Setting up the machine When setting up your Z6, please note the following: Place the Z6 on a horizontal surface that is not sensitive to water. Choose a spot for your Z6 which protects the machine against overheating. Ensure that the ventilation slots are not covered.
T For machines with a plug-in mains cable: Connect the mains cable to the machine. T Insert the mains plug into a power socket. T Press the On/Off button Q to switch the Z6 on. ‘Sprachauswahl’ ‘Deutsch’ E To view more languages, turn the Rotary Switch.
Page 12
T Place a receptacle under the dual spout. ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. The start screen is displayed. Your Z6 is ready for use. E The display shows the products you can prepare.
E Your Z6 is equipped with the HP3 milk system. Connect accessory Your Z6 is equipped with the JURA Smart Connect. This allows you (wireless connection) to connect the machine wirelessly to a compatible JURA accessory (e.g.
Page 14
Smart Connect is not inserted or is not inserted correctly into the service socket. T Press the Rotary Switch to enter the programme item. ‘Connect accessory’ T Now follow the instructions on the display to connect the accessory to the Z6.
The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. Ways of preparing a The Z6 offers various ways of preparing a speciality coffee, milk or beverage hot water.
T Place a cup under the dual spout. T Press the ‘Coffee’ button. Preparation starts. ‘Coffee’ and the coffee strength are dis- played. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your Z6 is once more ready for use.
Preparation stops automatically. Your Z6 is once more ready for use. Latte macchiato, Your Z6 prepares latte macchiato, cappuccino, flat white and other cappuccino and other speciality coffees with milk at the touch of a button. There is no need speciality coffees with to move the glass or cup.
2 Preparation Caffè Barista and lungo For the ‘caffè Barista’ and ‘lungo Barista’, the Z6 blends the coffee Barista with hot water using a special preparation method. This results in a full-bodied speciality coffee which is particularly easy to digest. You can change the amount of this additional water (see Chapter 4 ‘Permanent settings in programming mode –...
Preparation starts. ‘Espresso’, the preset amount of water for coffee flows into the cup. Preparation stops automatically. Your Z6 is once more ready for use. Adjusting the grinder You can adjust the grinder to suit the degree of roast of your coffee.
2 Preparation Hot water The Z6 allows you to prepare different variants of hot water: ‘Hot water’ ‘Hot water for green tea’ ‘Hot water for black tea’ CAUTION There is a danger of scalding from hot water splashes. T Avoid direct contact with the skin.
The rinse stops automatically. The start screen is displayed. Daily maintenance To ensure that you get many years of reliable service out of your Z6 and to guarantee the optimum coffee quality, the machine requires daily maintenance.
Traces of milk and coffee may stick to the top and bottom of the cup grille. If this happens, clean the cup grille. Switching off the When the Z6 is switched off, the system is automatically rinsed if a machine speciality coffee has been prepared.
‘Machine settings’ ‘Choose language’ T Select your language. ‘Switch off after’ T Set the time after which the Z6 should switch off automatically. ‘Factory setting’ T Reset the machine to its factory setting. ‘Units’ T Select the unit for the amount of water.
4 Permanent settings in programming mode Programme item Sub-item Explanation ‘Connect accessory’, T Connect the Z6 wirelessly to a JURA ‘Disconnect accessories’ accessory or disconnect the connection again. (Only displayed if the JURA Smart Connect is being used.) Product settings In the programme item ‘Product settings’...
Page 25
4 Permanent settings in programming mode Product Coffee Amount More settings strength Two ristretti, – Coffee: The amount set for Temperature (as for single two espressi, the single product is product), two coffees, doubled. product name two caffè Barista, two lungo Barista Cappuccino 10 levels Coffee: 25 ml – 240 ml...
Z6. You can move any of these products to your preferred position on the start screen or in the product selector and make it one of your favourites. You can personalise the products you want by giving them a new product name and individual settings (e.g.
Automatic switch-off By instructing your Z6 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your Z6 switches off automatically after the preset time following the last action on the machine.
4 Permanent settings in programming mode Smart mode Your Z6 has a ‘Smart mode’. If this mode is activated, the products on the start screen will be rearranged according to your personal preferences after some time. E The star on the start screen indicates that the ‘Smart mode’ is activated.
4 Permanent settings in programming mode T Press the Rotary Switch to enter the programme item. ‘Water hardness’ T Turn the Rotary Switch to change the setting. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Water hardness’ T ...
In the programme item ‘Machine settings’ ‘Factory setting’ machine can be reset to its factory setting: This resets all user set- tings to the factory setting. Your Z6 then switches off. Precondition: The start screen is displayed. T Press the Rotary Switch. ‘Maintenance status’...
T Press the ‘ ’ button until the start screen is displayed again. Language In this programme item you can set the language used by your Z6. Example: Proceed as follows to change the language from ‘English’ to ‘Deutsch’. Precondition: The start screen is displayed.
4 Permanent settings in programming mode Querying information In the programme item ‘Machine settings’ you can view the follow- ing information: ‘Product counter’: Number of prepared coffee speciality coffees, speciality coffees with milk and hot water ‘Maintenance counter’: Number of maintenance programmes performed (cleaning, descaling etc.) ‘Version’: Software version Example: ...
5 Maintenance 5 Maintenance Your Z6 has the following integrated maintenance programmes: Rinsing the machine Rinsing the milk system in the dual spout Cleaning the milk system in the dual spout (‘Clean the milk system’) Changing the filter (‘Change the filter’) (only if filter is fitted)
T Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. E To clean the milk system, use the container supplied. Precondition: The start screen is displayed.
T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
T Connect the milk pipe to the dual spout. Inserting/changing the Your Z6 no longer has to be descaled if you are using the CLARIS filter Smart filter cartridge. E Once the filter cartridge stops working (depending on the water hardness setting), the Z6 will prompt you to change the filter.
‘Empty drip tray’ T Empty the drip tray and coffee grounds container and put them back into the machine. The start screen is displayed. Your Z6 is once more ready for use. Cleaning the machine After 180 preparations or 80 switch-on rinses, the Z6 will prompt you to clean it.
Page 38
The operation stops automatically. ‘Empty coffee grounds container’ T Empty the drip tray and coffee grounds container and put them back into the machine. The start screen is displayed. Your Z6 is once more ready for use.
5 Maintenance Descaling the machine The Z6 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcifica- tion depends on the hardness of your water. E If you are using a CLARIS Smart filter cartridge, you will not be prompted to descale.
Page 40
‘Empty drip tray’ T Empty the drip tray and coffee grounds container and put them back into the machine. The start screen is displayed. Your Z6 is once more ready for use. E If the descaling operation stops unexpectedly, rinse the water...
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.
T Replace the CLARIS Smart filter cartridge The Z6 is prompting a filter change. (see Chapter 5 ‘Maintenance – Inserting/ changing the filter’). ‘Clean The Z6 is prompting you to clean it. T Perform cleaning (see Chapter 5 machine’ ‘Maintenance – Cleaning the machine’). ‘Decalcify...
7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is The dual spout is dirty. T Make sure the cover of the dual spout is produced when the correctly fitted. milk is frothed or T Clean the milk system in the dual spout milk sprays from the (see Chapter 5 ‘Maintenance –...
Page 44
Other ‘Error’ – T Switch the Z6 off with the On/Off button Q. messages are Contact customer support in your country displayed. (see Chapter 11 ‘JURA contact details / Legal information’).
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your Z6. It should be used to protect the system machine during transport. In order to protect the Z6 from frost during transport, the system must be emptied.
9 Technical data 9 Technical data Voltage 220 – 240 V ~, 50 Hz Power 1450 W Conformity mark Energy consumption approx. 6 Wh Pump pressure static, max. 15 bar Holding capacity of water tank 2.4 l Holding capacity of bean container 280 g Holding capacity of coffee grounds max. 20 portions container Cable length approx.
10 Index 10 Index Addresses 52 Daily maintenance 21 Adjusting the product settings 24 Descaling Aroma preservation cover Machine 39 Bean container with aroma preservation Water tank 41 cover 4 Display 5 Automatic switch-off 27 Display brightness 29 Display messages 42 Disposal 45 Bean container Double product 17...
Page 48
Instant coffee Hot water 20 Ground coffee 18 Latte macchiato 17 Internet 10 Lungo Barista 18 Ristretto 16 JURA Two coffees 17 Contact details 52 Two espressi 17 Internet 10 Two ristretti 17 Two speciality coffees 17 Using the product selector 15...
Page 49
10 Index Safety 6 Safety information 6 Service socket 5 Settings Permanent settings in programming mode 23 Setting up Setting up the machine 10 Short operating instructions 10 Smart Connect 5 Smart mode 28 Spout Height- and width-adjustable dual spout Hot-water spout 4 Storing products 26 Switching off 22...
J73920/Z6/en/201807 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 E You will find additional contact details for your country at www.jura.com. E If you need assistance with using your machine, you can find this at www.jura.com/service.