Floor Plate; Positioning Your Wood-Burning Stove; Distance To Furniture - SCAN 68-16 Assembly And Instruction Manual

20
Load bearing underlay
All of the products in our portfolio are classified as light-duty fire-
places; in most cases, there is no need to reinforce the floor, so that
you can typically use the normal floor.
However, you should make sure that the load bearing underlay can
bear the weight of the wood-burning stove and that of the chimney.

Floor plate

If you are setting up the stove on a flammable floor, observe national
and local regulations on the size of the non-flammable underlay that
covers the floor around the stove.
Your local Scan dealer can advise you on regulations concerning
flammable materials in the vicinity of your stove.
The idea behind the floor plate is that it protects the floor and flam-
mable material against sparks.
The floor plate can be made of steel or glass, and the stove can be set
up on brick, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate, and
can thus be set up on any flammable material without a protective
underlay.
If you are using a shaped floor plate, you should adjust the stove
upwards to allow the plate to be inserted under the front of the
stove.
Large shaped floor plate in glass or steel
lille gulvplade
EMNE:
N/A
VÆGT:
N/A
AREAL:
er\Designs\Scan 68\90068032.idw
Small shaped floor plate in glass
or steel.
90068032
TG.NR:
21-04-2015 hms
DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
A S S E M B LY
Installation:

Positioning your wood-burning stove

The wood-burning stove must be set up so that the stove itself, the
flue pipe, and the chimney can all be cleaned.

Distance to furniture:

with lateral glass panes
without lateral glass panes
But please check to avoid furniture or other furnishings being dried
out due to being too close to the stove.
All national and local requirements concerning safety distances for
wood burning stoves must be respected.
If you connect the stove to a steel chimney, the safety distances of
the steel chimney must also be respected.
Wall model: Distance from the floor to the stove
The wall model is only to be mounted on a non-
combustible wall.
950 mm
1100 mm