Technical Specifications; Physical Characteristics - IBM G8052 Installation Manual

RJ-45 LEDs
The RJ-45 LEDs are shown in the following illustration.
Link LED
Status LEDs for the RJ-45 management port are described in the following table.
SFP+ LEDs
Status LEDs for the SFP+ ports are described in the following table.

Technical specifications

The RackSwitch G8052 technical specifications are described in the following
sections.

Physical characteristics

The physical characteristics of the RackSwitch G8052 are listed in the following
table.
10
IBM System Networking RackSwitch G8052: Installation Guide
Table 4. System LED descriptions (continued)
Function Master
Note 1: If service required is due to a power supply failure, this LED flashes. Otherwise,
it is steady green.
Note 2: If service required is due to fan failure, this LED flashes. Otherwise, it is steady
green.
Note 3: If service required is due to a stacking error, this LED flashes or is steady
green, depending on its last known good state.
Note 4: If an operations command is sent to the unit, this LED is steady blue. It can be
used to locate the device.
RJ-45 port LEDs
Activity LED
Table 5. RJ-45 LEDs status
LED Steady green
Link Link up
Speed 100/10000 Mbps
Table 6. SFP+ LEDs status
Steady green
Link up
Speed, 10 Gb SFP+
Table 7. Physical characteristics
Specification
Dimensions (H x W x D)
Weight
Member Power supply
Flash green
Activity
Not applicable
Flash green
Activity
Not applicable
Physical characteristics
4.4 x 43.9 x 44.5 cm.
(1.73 x 17.3 x 17.5 in.)
10.5 kg. (18.4 lb) (maximum)
Service
Off
No link
10 Mbps
Off
No Link
1 Gb SFP+