IBM G8052 Installation Manual page 71

Table 17. RackSwitch G8052, Model 1455-48E replaceable parts (continued)
Description
25 m blue Ethernet
0.5 m IBM passive DAC SFP+
1 m IBM passive DAC SFP+
3 m IBM passive DAC SFP+
5 m IBM passive DAC SFP+
7 m IBM passive DAC SFP+
8.5 m IBM passive DAC SFP+
1 m IBM active DAC SFP+
3 m IBM active DAC SFP+
5 m IBM active DAC SFP+
1 m IBM QSFP+ DAC (breakout)
3 m IBM QSFP+ DAC (breakout)
5 m IBM QSFP+ DAC (breakout)
1 m IBM QSFP-to-QSFP
3 m IBM QSFP-to-QSFP
5 m IBM QSFP+ to QSFP+
7 m IBM QSFP+ to QSFP+
1.0 m InfiniBand
3.0 m InfiniBand
Rail kits
2-post rack mounting
IBM System Networking adjustable 19"
4-post rail
1U, air duct, 483 mm
For your safety, a power cord with a ground attachment plug is available to order
for use with this product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
Power cords for this product that are used in the United States and Canada are
listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum of 18 AWG, Type SVT or SJT, three-conductor
cord, a maximum of 15 feet in length and a parallel blade, grounding-type
attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S.): Use a UL-listed and
CSA-certified cord consisting of a minimum of 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
Tier 1 CRU part number
40K8970
00D6289
90Y9426
90Y9429
00D6150
49Y7930
90Y9435
46K6182
46K6183
46K6184
49Y7930
49Y7931
49Y7932
49Y7934
49Y7935
00D5809
00D5812
74Y6074
74Y6075
90Y3532
00D6119
00D6120
Chapter 6. Replaceable switch parts
57