Table of Contents
Advertisement
Status LEDs for the QSFP+ ports are described in the following table. When the
port is 40 GbE mode, only the first LED applies. When the port is in four 10 GbE
mode, each LED provides status for its corresponding 10 GbE port, as noted in the
following table.
Omni Port LEDs
Status LEDs for the Omni Ports are located on the front panel and are described in
the following table.
Technical specifications
The IBM System Networking RackSwitch G8624CS technical specifications are
described in the following sections.
Physical characteristics
The physical characteristics of the System Networking RackSwitch G8264CS are
listed in the following table.
12
IBM System Networking RackSwitch G8264CS: Installation Guide
Table 7. QSFP+ LEDs status
Steady
LED
green
QSFP+ link
Valid link
QSFP+
10 Gb SFP+
speed
Table 8. Omni Port LEDs status
Steady
LED
green
Link
Valid link
Speed
10G 4/8 Gb
Mode
The port pair
is configured
for FC mode.
Table 9. Physical characteristics
Specification
Dimensions (H x W x D)
Weight
Airflow
Flashing
Solid
green
Amber
Activity
Not
applicable
Not
Not
applicable
applicable
Flashing
green
Solid Amber
Activity
Not
applicable
Not
Not
applicable
applicable
One or both
Not
of the
applicable
installed
devices is not
compatible
with the
mode
configured
(Ethernet/FC)
for the port
pair.
Physical characteristics
4.45 x 43.9 x 48.26 cm.
(1.75 x 17.3 x 19 in.)
10.35 kg. (22.1 lb) (maximum)
Front-to-rear, rear-to-front
Flashing
Amber
Off
Not applicable No link
Not applicable 1 Gb SFP
Flashing
Amber
Off
Not applicable No link
Not applicable Not
applicable
Not applicable The port pair
is configured
for Ethernet
mode.
Advertisement
Table of Contents
