Active Calls; Hold; One Call On Hold; Holding Multiple Calls - Snom D375 User Manual

D375 | Snom 370 User Manual
A
ctive calls

Hold

One call on hold

Press to put the ongoing call on hold. Held calls are indicated threefold:
◦
By the text on the display.
◦
By the slowly blinking line key.
◦ By the slowly blinking call indication LED.
You can now:
◦
transfer the held call blindly or with prior announcement - see "Transferring calls" on page
53.
◦
receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing
while on hold the call terminates on your phone as well, and the indicators are turned off.

Holding multiple calls

If you are in a call with one party and have one or more calls on hold or if there is more than one call
on hold, you can switch back and forth between the active call and any call on hold, transfer calls,
etc. The info bar and the status line will tell you how many total calls there are and which one you
are connected to. Your input on the phone's keys will affect the call on-screen at the time, i.e., the call
shown in the contact area of the display. Up to 12 simultaneous calls are possible.
Figures H-1 to H-3 show the phone connected to one call with two calls on hold; Figures H-4 to H-6
show the phone with three calls on hold and no connected call.
Fig. H-1
again. If the other party hangs up
Fig. H-2
50
Using the Phone
Fig. H-3