Turning On Forwarding Of All Calls With A Programmable Function Key; Turning Off Call Forwarding - Snom D375 User Manual

D375 | Snom 370 User Manual
The setting will change to "1 Enable forwarding [Yes]", indicating that call forwarding is now active.
Press for two seconds to return to the idle screen.
The status line and the status info screen will indicate that call forwarding is turned on and what
number calls will be forwarded to.
Note: Forwarding when busy and after timeout are indicated in the status line, which
can display only one message at a time. When both are active at the same time, only
"Forward when busy" will be displayed. If there are other status messages with a higher
priority than "Forward when Busy" (e.g., firmware update available, reboot required,
waiting for call completion, etc.), they will take precedence over the call forwarding
indication.
Press to show status info with all current status messages, including call
forwarding.
Forwarding
all calls:

Turning on forwarding of all calls with a programmable function key

If the function key
on the Function Keys page of the phone's web interface. For further information see "Configuring the
function keys" on page 58 .
1. Press . The display will show the "Target when Forwarding" screen.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press .
Turning off forwarding of all calls: Press

Turning off call forwarding

Forward all
Press
Press
2 Call Features
Press
1 Call Forwarding
Press
1 Forward All
Press
1 Enable forwarding [Yes]
The menu item changes to "1 Enable forwarding [No]". Press
screen.
Turning off forwarding of all calls with the programmable function key: Press
Forwarding
when busy
or after
timeout:
is not available when the display is in idle mode, you can make it available
Forward when busy
2 Call Features
1 Call Forwarding
2 Forward when Busy
1 Enable forwarding [Yes]
.
for two seconds to return to the idle
57
Using the Phone
Press
"i":
Forward after timeout
2 Call Features
1 Call Forwarding
3 Forward after Timeout
1 Enable forwarding [Yes]
.