Conference; Initiating A Conference; Conference Screen Navigation - Snom D375 User Manual

D375 | Snom 370 User Manual
Fig. H-4
• Figures H-1 to H-3:
◦
In Fig. H-1 the connected call is on-screen. Press
◦
In Fig. H-2 the first held call of a total of two (1/2) is on the screen. Press
the second held call (2/2) on the screen (Fig. H-3). If there are more held calls, continue
likewise.
◦
Press to scroll back through the held calls (Fig. H-2 and H-3).
◦
When a held call is on-screen, press
hold.
• Figures H-4 to H-6:
◦
In Fig. H-4 the first held call of a total of three Calls on Hold (1/3) is on-screen. Press
put the second held call on the screen.
◦
In Fig. H-5 the second held call (2/3) is on the screen. Press
call (3/3) on the screen (Fig. H-6). If there are more held calls, continue likewise.
◦
Press to scroll back through the held calls (Fig. H-6 and H-5).
◦
To connect to the held call currently on-screen, press
• When the connected call is on-screen, you can terminate it by pressing
• You can transfer the on-screen call, whether connected or held. See Call Transfer for more
information.

Conference

The maximum number of participants is three.

Initiating a conference

1. Call the first intended participants and put him or her on hold.
2. Call the next intended participant.
Note: You do not need to put the last participant on hold before starting the conference.
3. Press to start the conference.

Conference screen navigation

Your input on the phone's keys will affect the caller/callee(s) or the entire conference shown in the
contact area of the display.
Fig. H-5
to put the first held call on the screen.
to connect to it and put the current connected call on
.
51
Using the Phone
Fig. H-6
again to put
again to put the third held
.
to