Settings Menu - OM POWER OM2000+ User Manual

Second and third line programmable parameters are:

Forward Power

Reflected Power

Input Power

SWR

TUNE

Temperature

Frequency

Plate voltage – Up

Plate current – Ip

Screen voltage – Us

Screen current – Is

Screen current – graph

Grid voltage – Ug

Grid current Ig

Heating voltage – Uf
5.2.2.

Settings menu

Settings menu offers EBS settings, factory default parameters restoring, display contrast settings and
auxiliary fan operating modes.
S2 and S3 now changed their functions.
To edit left side of the second line, press LEFT
Type of supported TCVR and working
button.
frequency are visible on the display.
Go UP or DOWN to select desired parameter.
Press ENT to confirm selection.
Type of supported TCVR and working
frequency are visible on the display.
If you finish left side settings, press ESC to go
back to the side selection.
Type of supported TCVR and working
To start edit right side, press RIGHT
frequency are visible on the display.
button....etc.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
16