OM POWER OM2000+ User Manual page 19

If you wish to restore factory default
parameters, use UP or DOWN button to
select Restore default parameters. Then press Type of supported TCVR and working
ENT.
frequency are visible on the display.
Press YES for 1 second to confirm restoring.
Type of supported TCVR and working
frequency are visible on the display.
Use UP or DOWN button to select LCD
contrast. Press ENT.
Type of supported TCVR and working
frequency are visible on the display.
Use UP or DOWN button to set contrast value.
Press ENT to confirm settings.
Type of supported TCVR and working
frequency are visible on the display.
Use UP or DOWN button to set auxiliary fan
working condition.
Type of supported TCVR and working
Press ENT to confirm settings.
frequency are visible on the display.
Use UP or DOWN button to set first mode. The
fan will activate at a fixed temperature
(programmed in uP).
Type of supported TCVR and working
Press ENT to confirm settings.
frequency are visible on the display.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
AUTO LED is ON.
18