Toyota 2014 Sienna Manual page 630

3-8. Other interior features
■
Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
STEP 1
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the
surface of the HomeLink
Keep the indicator light on the HomeLink
STEP 2
Press and hold the selected HomeLink
STEP 3
Repeatedly press and release (cycle) the device's remote
control button for two seconds each until step 4 is complete.
STEP 4
When the indicator light on the HomeLink
ceiver starts to flashing rapidly, release the buttons.
STEP 5
Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
STEP 6
Repeat the steps above to program another device for each of
the remaining HomeLink
■
Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■
Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
630
SIENNA_OM_OM45483U_(U)
®
.
®
in view while programming.
®
button.
®
by pressing the newly
®
buttons.
®
buttons cannot be erased but can be
®
compatible trans-