Toyota 2014 Sienna Manual page 500

3-3. Using the Bluetooth
Vehicles without a smart key system
When the portable player is on standby for the connection, it will be
automatically connected whenever the engine switch is in either
"ACC" or "ON" position.
If a portable player that has already been paired is selected, it is nec-
essary to select "From Car" or "From audio" setting.
Vehicles with a smart key system
When the portable player is on standby for the connection, it will be
automatically connected whenever the "ENGINE START STOP"
switch is in either ACCESSORY or IGNITION ON position.
If a portable player that has already been paired is selected, it is nec-
essary to select "From Car" or "From audio" setting.
Changing the registered name of a portable player
STEP 1
Select "Change Name" using a voice command or
STEP 2
Select the name of the portable player to be changed by
either of the following methods, and select "Confirm" using a
voice command or
a. Press the talk switch and say the name of the desired por-
table player.
b. Press the talk switch and say "List Audio Players". When
the name of the desired portable player is read aloud, press
the talk switch.
STEP 3
Press the talk switch or select "Record Name" using
and say the new name.
STEP 4
Select "Confirm" using a voice command or
500
SIENNA_OM_OM45483U_(U)
®
audio system
:
.
,
.