Toyota 2014 Sienna Manual page 269

■
System check display
Vehicles without a smart key system
After switching the engine switch to the "ON" position, "SIENNA" is dis-
played while system operation is checked. When the system check is
complete, the normal screen will return.
Vehicles with a smart key system
After switching the "ENGINE START STOP" switch to IGNITION ON
mode, "SIENNA" is displayed while system operation is checked. When
the system check is complete, the normal screen will return.
■
When "--", "E" or "F" is displayed on the outside temperature display
The system may be malfunctioning. Take your vehicle to your Toyota dealer.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
●
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
NOTICE
■
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
SIENNA_OM_OM45483U_(U)
2-2. Instrument cluster and information display
2
269