Toyota 2014 Sienna Manual page 259

■
Trip Timer
Set up display
■
Before setting
STEP 1
STEP 2
SIENNA_OM_OM45483U_(U)
2-2. Instrument cluster and information display
Displays the elapsed time since the timer was
reset.
The timer only functions when the engine is running.
The timer can be started and paused by pressing the
"SELECT RESET" button, and reset by pressing and
holding the "SELECT RESET" button when the trip
timer is displayed.
Press the "SETUP" button while
the vehicle is stopped.
The "Custom Settings" screen is
displayed on the multi-information
display.
If left idle for approximately 20
seconds, the display will revert to
the previous screen.
Select "Display / Clock" by
pressing the "INFO" or "SETUP"
button, and press the "SELECT
RESET" button.
If you select "Exit" and press
"SELECT RESET", the display
will revert to the previous screen.
2
259