Toyota 2014 Sienna Manual page 327

■
Rear view monitor system camera
■
Smear effect
SIENNA_OM_OM45483U_(U)
2-4. Using other driving systems
In the following cases, it may be difficult
to see the images on the screen, even
when the system is functioning correctly.
• The vehicle is in a dark area, such as
at night.
• The temperature near the lens is
extremely high or low.
• Water droplets are on the camera lens
or humidity is high, such as when it
rains.
• Foreign matter, such as snow and
mud, adheres to the camera lens.
• The sun or headlights are shining
directly into the camera lens.
• When the camera is used under fluo-
rescent lights, sodium lights, mercury
lights etc., the lights and the illumi-
nated areas may appear to flicker.
• If the lens is scratched.
If a bright light, such as sunlight reflected
off the vehicle body, is picked up by the
camera, a smear effect
the camera may occur.
*
: Smear effect – A phenomenon that
occurs when a bright light is picked up
by the camera; when transmitted by
the camera, the light source appears to
have a vertical streak above and below
it.
2
*
characteristic to
327