Toyota 2014 Sienna Manual page 203

Installing child restraints using a seat belt (child restraint lock
function belt)
Rear facing Infant seat/convertible seat
■
STEP 1
STEP 2
STEP 3
SIENNA_OM_OM45483U_(U)
1-7. Safety information
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt
and allow it to retract to put it in
lock mode. In lock mode, the belt
cannot be extended.
1
203