Toyota 2014 Sienna Manual page 628

3-8. Other interior features
STEP 3
STEP 4
Repeat the steps above to program another device for each of
the remaining HomeLink
628
SIENNA_OM_OM45483U_(U)
Test the operation
®
HomeLink by
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold the
®
HomeLink button. The garage
door has the rolling code feature
if the indicator light (on the
®
HomeLink ) flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing "Programming a rolling code
system".
®
buttons.
of the
pressing the
programmed