Automatic High Beam - Toyota 2014 Sienna Manual

2-3. Operating the lights and wipers

Automatic High Beam

The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., and automatically turns high beam on or off
as necessary.
■
Activating the Automatic High Beam system
SIENNA_OM_OM45483U_(U)

Push the lever away from you
with the headlight switch in the
position
engine switch is in the "ON"
position (vehicles without a
smart key system) or the
"ENGINE START
switch is in IGNITION ON
mode (vehicles with a smart
key system).
The Automatic High Beam indi-
cator will come on when the
headlights are turned on auto-
matically to indicate that the
system is active.
2
when the
STOP"

: If equipped
277