■
Shift ranges and their functions
● Automatically selecting gears between 1 and 6 according to
vehicle speed and driving conditions. But, the gear is limited
according to selected shift range.
● You can choose from 6 levels of engine braking force.
● A lower shift range will provide greater engine braking force than
a higher shift range, and the engine speed will also increase.
■
S mode
●
When the shift range is 5 or lower, holding the shift lever toward "+" sets
the shift range to 6.
●
To prevent excessive engine speed, a function was adopted that auto-
matically selects a higher shift range before the engine speed becomes
too high.
●
To protect the automatic transaxle, a function is adopted that automati-
cally selects a higher shift range when the fluid temperature is high.
■
When driving with the cruise control or dynamic radar cruise control (if
equipped)
Engine braking will not occur in S mode, even when downshifting to 5 or 4.
(P. 297, 302)
■
If the shift lever cannot be shifted from P
P. 778
●
●
Vehicles with AUTO ACCESS SEAT: If the AUTO ACCESS SEAT has
not been locked in place after being stowed, the shift lever cannot be
shifted from P.
For details, refer to "AUTO ACCESS SEAT OWNER'S MANUAL".
SIENNA_OM_OM45483U_(U)
2-1. Driving procedures
241
2