Toyota 2014 Sienna Manual page 562

3-5. Using the hands-free phone system (for cellular phone)
Using the call history memory
Follow the procedure below to use a number stored in the call history
memory:
STEP 1
Press the talk switch and say "Redial" (when using a number
stored in the outgoing call history memory) or "Call back"
(when using a number stored in the incoming call history
memory).
STEP 2
Select the number by either of the following methods:
a. Say "Previous" or "Go back" until the desired number is dis-
played.
b. Select the desired number using
The following operations can be performed:
Dialing: Press the off-hook switch or select "Dial" using a voice
command or
Storing the number in the phone book: Select "Store" using a voice
command or
Deleting: Select "Delete" using a voice command or
562
SIENNA_OM_OM45483U_(U)
.
.
.
.