Basic - Panasonic AJ-HPM100P Operating Instructions Manual

BASIC

This menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12
and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and other
displays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock.
Item
FR SUPER
No. DISP.
0000
0001
001 LOCAL ENA
0002
0000
002 CTL DISP
0001
0000
0001
0002
0003
003 REMAIN SEL
0000
0001
0002
0003
0004
0005
0006
0007
0008
0009
006 DISPLAY SEL
0000
0004
007 CHARA H-POS
0016
Setting
FR SUPER
No. DISP.
DIS Restricts the number of buttons on the key panel that are available when the CONTROL
STOP switch is set to REMOTE.
0: No buttons are available.
ENA
1: Only the STOP button is available.
2: All buttons are available.
12h Switches the CTL counter display between 12 and 24-hour clock display.
±
0: 12-hour clock display
24h
1: 24-hour clock display
OFF Specifies whether to display the remaining time or total time via the VIDEO MON connector
2L and via superimposed display of the LCD panel.
1L 0: No display.
1: Displays remaining media time on the second line.
R/TTL
2: Displays remaining media time on the first line.
3: Displays the remaining media time on the first line and total media time on the second
line.
NOTE:
• These functions are not displayed when "2L" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
• Total tape time is not displayed when "R/TTL" is selected and "TIME" is set in setup
menu No. 006 (DISPLAY SEL).
TIME Specifies the output of the VIDEO MON connector or what is displayed in the
T&STA superimposed display of the LCD panel.
Here, "data" indicates the CTL/TC/UB value selected with the COUNTER button.
T&S&M
0: Data only
T&RT
1: Data and operating status
T&YMD
2: Data, operating status and mode
T&MDY
3: Data and REC TIME
T&DMY
4: Data and REC DATE (year/ month/day)
T&UB
5: Data and REC DATE (month/day/year)
T&CTL
6: Data and REC DATE (day/month/year)
T&T
7: Data and user bit
However, when UB is selected with the COUNTER button, the time code is indicated after
the user bit.
8: Data and CTL
However, when CTL is selected with the COUNTER button, the time code is indicated after
CTL data.
9: Data and time code
NOTE:
An error message appears in the superimposed display if a warning or error occurs
when T&S&M is selected.
0 Specifies the horizontal character position output via the VIDEO MON connector or
| | displayed in the superimposed display of the LCD panel.
4
| |
16
* An underlined setting indicates an initial value.
Settings and brief function description
111
Setup: Item Settings