Panasonic AJ-HPM100P Operating Instructions Manual page 112

Item
FR SUPER
No. DISP.
008 CHARA V-POS
009 CHARA TYPE
020 SYS FORMAT
024 REC FMT(SD)
025 REC FMT (HD)
026 PLY LST FMT
112
Setup: Item Settings
Setting
FR SUPER
No. DISP.
When set to 59.94 Hz Specifies the vertical character position output via the VIDEO MON connector or displayed
in the superimposed display of the LCD panel.
0000 0
| |
0020 20
| |
0022 22
When set to 50 Hz
0000 0
| |
0022 22
| |
0028 28
0000 WHITE Specifies the display type output via the VIDEO MON connector or in the superimposed
display, SETUP-MENU and other LCD panel displays.
0001 W/OUT
0: White characters against a solid black background
1: White characters with a black border
When set to 59.94 Hz Specifies the recording format used by this unit.
0: 1080i mode
0000 1080i
1: 720p mode
0001 720p
2: 480i mode (when set to 59.94 Hz)/576i mode (when set to 50 Hz)
0002 480i
When set to 50 Hz
0000 1080i
0001 720p
0002 576i
0000 50M
Specifies the recording format when menu No. 020 SYS FORMAT is set to 480i or 576i.
0: DVCPRO50 (50 Mbps)
0001 25M
1: DVCPRO (25 Mbps)
0002 DV
2: DV (25 Mbps)
0000 DVCPRO Specifies the recording format when 1080i or 720p is selected in menu No. 020 SYS
FORMAT.
0001 AVC50
0: DVCPRO HD(100Mbps)
0002 AVC100
1: AVC-Intra50
2: AVC-Intra100
NOTE:
Appears only when an optional AJ-YBX200G AVC-Intra Codec board is installed.
When set to 59.94 Hz Specifies the format used by the play list.
<In the DVCPRO HD format>
0000 SYSFMT
0: Format set in menu No. 020 SYS FORMAT and No. 025 REC FMT (HD).
0001 30PN
1: 720/30PN (when set to 59.94 Hz)/720/25PN (when set to 50 Hz)
0002 24PN
2: 720/24PN
When set to 50 Hz
<In the AVC-Intra format>
0000 SYSFMT
0: Format set in menu No. 020 SYS FORMAT and No. 025 REC FMT (HD).
0001 25PN
1: 1080/30PN (when set to 59.94 Hz)/1080/25PN (when set to 50 Hz) or 720/30PN (when
set to 59.94 Hz)/720/25PN (when set to 50 Hz)
2: 1080/24PN or 720/24PN
NOTE:
• When 480i or 576i is selected in menu No. 020 SYS FORMAT, a 30PN and 24PN
selection is handled as a SYSFMT setting.
• The number of lines in the AVC-Intra format depends on the setting in the No. 020
SYSFORMAT menu.
Settings and brief function description